Emergency Drive Battery Wiring Diagram KVD188C

KVD188C 10W-100W LED emergency battery backup kit for an LED lighting fixture with the external driver in a cost-effective way.

This CE ROHS certified LED emergency conversion kit has the LED emergency driver and li-ion battery all inside the ABS box, it is convenient and safe for use.

Output Voltage 10-85VDC, Support non-isolated Driver Lighting Products

Each LED lighting emergency module is consist of an emergency driver and battery power, and sometimes there is an extra box container outside.

KVD188C 10W-100W LED Emergency Driver Power 90mins 180 mins an energy-saving solution for LED lighting emergency projects. If you are looking for an LED Emergency Driver Power kit for the LED Light series, please click here

 

Emergency LED Driver Battery Backup Kits specifications:
1. Emergency Power: 3W 5W
2. Lighting fixture Power: 10W-100w
3. Conversion Efficiency: ≥95%
4. Battery Type: 1 pcs Li-ion battery inside
5. Emergency runtime : 3w and 1.5 hours  with 2000 mAh Li-ion battery or 5w and 3 hours with 5000 mAh Li-ion battery
6. Input Voltage: AC220-240V
7. Output Voltage: DC10V-85V  (DC30-165V  needs to be Customized )
8. Charging Time: 24 hours
9. Product Weight: 2000mAh Li-ion battery-230g   5000mAh Li-ion battery-300g
10. Working Lifetime(Hour)30000
11. 3 years warranty.
12. Best quality and factory price.
13. Obtain CE ROHS UKCA  CB from TUV

Emergency Ballast  Advantages:
Lighting emergency products
Obtained CE ,UKCA,TUV-CB certifications
Comply CE ,UKCA ordinances, and TUV-CB
Compatible with all brands of constant current LED drivers
Constant power outpus
High voltage output
Low energy consumption complies with CEC standards
Charging and dis-charging protection function and over heat temp. protection
Battery zero power consumption under static state
Mock-up electricity pause emergency testing function
Can be power off under emergency status
Indication light: city grid electricity,charging, fault
Seasonal self detect function
Protection functions: over voltage, short circuit, over load and open circuit
Metal housing, comply EMC, FCC and C tick ordinances
IP grade: IP20
We obtained international air and sea transportation documents

 

Working Environment Attention

Working & storage temperature: -0℃–+50℃(Standard temperature 20℃-35℃ is best )
To ensure a longer lifetime, an LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in the warehouse, an emergency battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in the right way.
Please make sure the wire connection is correct before switching on for long time usage.