Emergency Ballast Driver Battery Pack For Led Lights Li-ion 2000mAh 3.7V LED Lighting Battery Pack Kit

KVD188C Emergency Ballast Driver Battery Pack kits apply in Led constant current lighting luminaires’ normal lighting or emergency lighting mode, also can be only for emergency lighting purposes.

Emergency lighting solutions provided “charging”, and “discharging” functions, and use intelligent IC controlling circuits, according to be high exchange efficiency and smaller battery capacity.

Internal Li-ion battery, compatible with dimming or non-dimming led luminaire, external installation, emergency supply will be standing and charging by when AC grid electricity supply in normal, will be going to self-maintenance when fully charged, according to longer the battery’s lifespan

The emergency driver will be back up the lighting luminaires within 1 second when AC grid electricity stopped, to be sure the light can be working for 1 to 3hrs normally.

Categories: , , , , , , , ,

This is an Led Light Emergency Battery kit for indoor use, lighting emergency solution, and LED emergency light with an external driver, but the LED Panel lamps and Downlights can only use 20% reduce power LED emergency driver. If you are looking for an LED emergency driver power kit for LED lights, please click here

Emergency Ballast Driver Battery Pack specifications:
1. Emergency Power: 3W 5W
2. Lighting fixture Power: 10W-100w
3. Conversion Efficiency: ≥95%
4. Battery Type: 1 pcs Li-ion battery inside
5. Emergency  runtime: 1.5 hours with 2000 mAh Li-ion battery or 3 hours with 5000 mAh Li-ion battery
6. Input Voltage: AC220-240V
7. Output Voltage: DC10V-85V  (DC30-165V  needs to be Customized )
8. Charging Time: 24 hours
9. Product Weight: 2000mAh Li-ion battery-230g   5000mAh Li-ion battery-300g
10. Working Lifetime(Hour)30000
11. 3 years warranty.
12. Best quality and factory price

Emergency Ballast  Advantages:
Lighting emergency products
Obtained CE ,UKCA,TUV-CB certifications
Comply CE ,UKCA ordinances, and TUV-CB
Compatible with all brands of constant current LED drivers
Constant power outpus
High voltage output
Low energy consumption complies with CEC standards
Charging and dis-charging protection function and over heat temp. protection
Battery zero power consumption under static state
Mock-up electricity pause emergency testing function
Can be power off under emergency status
Indication light: city grid electricity,charging, fault
Seasonal self detect function
Protection functions: over voltage, short circuit, over load and open circuit
Metal housing, comply EMC, FCC and C tick ordinances
IP grade: IP20
We obtained international air and sea transportation documents

 

Working Environment Attention

Working & storage temperature: 0℃–+50℃（Standard temperature 20℃-35℃ is best）
To ensure a longer lifetime, an LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in the warehouse, an emergency battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in the right way.
Please make sure the wire connection is correct before switching on for long time usage.

Related products