Good Quality IP65 Epoxy Emergency Led Driver Battery Backup Kit

Emergency driver apply in Led constant current lighting luminaires’ normal lighting or emergency lighting mode, also can be only for emergency lighting purpose.

Emergency lighting solution provded “charging”, “discharging” functions, use intellgent IC controlling circuit, according to be high exchange efficiency and smaller battery capacity.

Internal Li-ion battery, compatible with dimming or non-dimming led luminaire, external installation, emergency supply will be standing and charging by when AC grid electricity supply in normal, will be going to self maintenance when fully charged,according to enlonger the battery’s lifespan

Emergency driver will be back up the lighting luminaires within 3 seconds when AC grid electricity stopped, to be sure the light can be working 1 to 3hrs normally.

IP65 waterproof Emergency Led Driver,Aluminum shell material,an energy-saving emergency solution for LED lighting fixture, we have 11.1v battery pack. The KVD188M support LED light powered at 20w-200w, lighting Emergency application.

The waterproof LED Emergency light fit for LED panel light, LED high bay light, LED mining light, LED down light, LED floodlight,LED Tunnel Lights,LED Ceiling light and tri-proof light.

20W-200w LED Lights,Emergency driver battery backup Kit specifications:
1. Emergency Power : 10W-22W
2. Lighting fixture Power: 20W-200w
3. Conversion Efficiency: ≥95%
4. Battery Type: Li-ion battery
5. Emergency duration time: 1.5-5hrs(can be customized based on your needs)
6. Input Voltage: AC220-240V
7. Output Voltage: DC20-85V
8. Charging Time: 24 hours
9. Working Lifetime: 30000 hours
10. 2 years warranty.
11. Best quality and factory price

LED emergency driver Features

Aluminum housing box outside, which covering the emergency driver and battery pack, filled with waterproof glue makes it 100% IP65 waterproof.
Heavy and durable box can be buried under the ground even, and have a very good heat radiation.
There are indicators at the side, and it can also connect with a remote control button for testing.
Automatically turns on LED lighting when there is a main power failure.
The LED emergency driver battery backup with overcharge and discharge protection, output short protection, overload protection, over temperature protection.
With indicator: Green=Main Circuit, Red=Charging.
Each led emergency driver are passed 100% full power load aging test, CE Rosh certified.

Working Environment Attention

Working & storage temperature: -10℃–+45℃(Standard temperature 28℃)
To ensure a longer lifetime, LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in a warehouse, emergency battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in a right way.
Please make sure wire connection is correct before switch on from long