Emergency Light Module Battery Kit KVD188D-EM30 for LED Tube T8 Full Power

KVD188D-EM30
Emergency drivers apply in Led constant current lighting luminaires’ normal lighting or emergency lighting mode, also can be only for emergency lighting purposes.

Emergency lighting solutions provided “charging”, and “discharging” functions, and use intelligent IC controlling circuits, according to be high exchange efficiency and smaller battery capacity.

Li-ion battery, compatible with dimming or non-dimming led luminaire, external installation, emergency supply will be standing and charging by when AC grid electricity supply in normal, will be going to self-maintenance when fully charged, according to longer the battery’s lifespan

The emergency driver will be back up the lighting luminaires within 1 second when AC grid electricity stopped, to be sure the light can be working for 1 to 3hrs normally.

Categories: , , , , , ,

This is an LED full power emergency light battery driver kit for indoor use, a lighting emergency solution, but the LED tube can only use a 100% full power LED emergency driver. If you are looking for an LED emergency driver power kit for LED lights, please click here

KVD188D-EM30
Battery-operated LED Tube Emergency Driver kit specifications
1. Emergency Power: Full Power For Lamps
2. Lighting fixture Power: up to 30w
3. Conversion Efficiency: ≥95%
4. Battery Type: Li-ion battery
5. Emergency runtime :1.5 hours to 3 hours
6. Input Voltage: AC100-277V
7. Output Voltage: DC180V-270V to Driver AC
8. Charging Time: 24 hours
9. Product Weight: 2000mAh Li-ion battery-400g   4000mAh Li-ion battery-500g
10. Working Lifetime(Hour)30000
11. 3 years warranty.
12. Best quality and factory price.
13. Obtain CE  ROHS

Emergency Ballast  Advantages:
Lighting emergency products
Obtained CE  certifications
Comply CE  ordinances
Compatible with all brands of constant current LED drivers
Constant current output
High voltage output
Low energy consumption complies with CEC standards
Charging and dis-charging protection function and over heat temp. protection
Battery zero power consumption under static state
Mock-up electricity pause emergency testing function
Can be power off under emergency status
Indication light: city grid electricity,charging, fault
Seasonal self detect function
Protection functions: over voltage, short circuit, over load and open circuit
Metal housing, comply EMC, FCC and C tick ordinances
IP grade: IP20
We obtained international air and sea transportation documents

 

Working Environment Attention

Working & storage temperature: 0℃–+50℃（Standard temperature 20℃-35℃ is best ）
To ensure a longer lifetime, an LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in the warehouse, an emergency battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in the right way.
Please make sure the wire connection is correct before switching on for long time usage.

Related products