IP65 Waterproof Emergency LED Driver Battery Backup Kit Installation Method

Emergency driver apply in Led constant current lighting luminaires’ normal lighting or emergency lighting mode, also can be only for emergency lighting purpose.

Emergency lighting solution provded “charging”, “discharging” functions, use intellgent IC controlling circuit, according to be high exchange efficiency and smaller battery capacity.

Internal Li-ion battery, compatible with dimming or non-dimming led luminaire, external installation, emergency supply will be standing and charging by when AC grid electricity supply in normal, will be going to self maintenance when fully charged,according to enlonger the battery’s lifespan

Emergency driver will be back up the lighting luminaires within 1 second when AC grid electricity stopped, to be sure the light can be working 1 to 3hrs normally.

Categories: , , , , , , , ,

IP65 waterproof Emergency Led Driver，Aluminum shell material，an energy-saving emergency solution for LED lighting fixture, we have 11.1v battery pack. The KVD188G support LED light powered at 20w-200w, lighting Emergency application.

The waterproof LED Emergency driver fit for industrial lighting，especially UFO Highbay lights, floodlights, tunnel lights, and explosion-proof lights.

Emergency LED Driver Battery Backup Kits specifications:
1. Emergency Power: 10W 20W  30W  40W
2. Lighting fixture Power: up to 200w
3. Conversion Efficiency: ≥95%
4. Battery Type: 1 pcs Li-ion battery inside
5. Emergency runtime :1.5 hours to 3 hours
6. Input Voltage: AC100-277V
7. Output Voltage: DC100V-260V
8. Charging Time: 24 hours
9. Product Weight: 2000mAh Li-ion battery-400g   4000mAh Li-ion battery-500g
10. Working Lifetime(Hour)30000
11. 3 years warranty.
12. Best quality and factory price.
13. Obtain CE  ROHS  UKCA

Emergency Ballast  Advantages:
Lighting emergency products
Obtained CE ,UKCA certifications
Comply CE ,UKCA ordinances
Compatible with all brands of constant current LED drivers
Constant power output
High voltage output
Low energy consumption complies with CEC standards
Charging and dis-charging protection function and over heat temp. protection
Battery zero power consumption under static state
Mock-up electricity pause emergency testing function
Can be power off under emergency status
Indication light: city grid electricity,charging, fault
Seasonal self detect function
Protection functions: over voltage, short circuit, over load and open circuit
Metal housing, comply EMC, FCC and C tick ordinances
IP grade: IP65
We obtained international air and sea transportation documents

 

Working Environment Attention

Working & storage temperature: 0℃–+50℃（Standard temperature 20℃-35℃ is best ）
To ensure a longer lifetime, an LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in the warehouse, an emergency battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in the right way.
Please make sure the wire connection is correct before switching on for long time usage.

Related products