How to choose a lighting emergency drive kit for a project?the following scenarios: Schools, hospitals, parking lots, subways, shopping malls, hotels, factories, etc. must comply with the requirements of the local government when choosing emergency drives. Some countries must comply with CB CE ROHS standards, and some countries must comply with UL and other standards.
This is an energy-saving solution of LED emergency battery backup for LED Emergency Light with external driver, and also for all dimmable lighting products can apply with emergency power-down function, as well as Led light, If you are looking for Tri-proof Light for LED Emergency Driver.
Emergency LED Driver Battery Backup Kits specifications:
1. Emergency Power: 3W 5W 8W 10W 12W
2. Lighting fixture Power: 10-80w
3. Conversion Efficiency: ≥95%
4. Battery Type: 1 pcs Li-FePO4 battery
5. Emergency runtime :1.5 hours to 3 hours
6. Input Voltage: AC220-240V
7. Output Voltage: DC30V-230V
8. Charging Time: 24 hours
9. Product Weight: 1500mAh Li-FePO4 battery-300g 3000mAh Li-FePO4 battery-500g
10. Working Lifetime(Hour)30000
11. 3 years warranty.
12. Best quality and factory price.
13. Obtain CE ROHS UKCA SAA and CB from TUV
Emergency Ballast Advantages:
Lighting emergency products
Obtained CE ,UKCA,SAA and CB from TUV certifications
Comply CE ,UKCA, SAA and CB from TUV ordinances
Compatible with all brands of constant current LED drivers
Constant power output
High voltage output
Low energy consumption complies with CEC standards
Charging and dis-charging protection function and over heat temp. protection
Battery zero power consumption under static state
Mock-up electricity pause emergency testing function
Can be power off under emergency status
Indication light: city grid electricity,charging, fault
Seasonal self detect function
Protection functions: over voltage, short circuit, over load and open circuit
Metal housing, comply EMC, FCC and C tick ordinances
IP grade: IP20
We obtained international air and sea transportation documents
Working Environment Attention
Working & storage temperature: 5℃–60℃（Standard temperature 20℃-35℃ is best ）
To ensure a longer lifetime, an LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in the warehouse, an emergency battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in the right way.
Please make sure the wire connection is correct before switching on for long time usage
